This article will provide instructions for replacing the bungee cord on your Ergatta or Ergatta lite rower.
- Lift the rower into the standing position, then disconnect the bungee cord from the recoil belt.
- Using both 5mm Allen Keys provided with your rower, remove the bungee pod by using one Allen Key to loosen the bolt while holding the nut in place with the other.
- Using the same Joint Connector Nut/Bolt, install the new bungee cord onto your rear spacer.
Please reach out to us if you have any additional questions, and include your rower’s serial number as well as your shipping address.